EchoDucer Two-Wire Ultrasonic Level Transmitter
The EchoDucer general purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 26' or 8m, and is well suited for corrosive or waste liquids. The transmitter is typically selected for atmospheric bulk storage, day tank or waste sump applications with challenging installations such as tall flanges, concrete ceilings, underground storage tanks or non-perpendicular fittings. Media examples include resin and sulfuric acid.
Tech Tip
The breakthrough insertion design eliminates acoustic interference often associated with tall installation fittings, concrete ceilings or underground bulk storage tanks.
The self leveling transducer can also be applied with installation fittings that are not perpendicular to the liquid surface.
The transducer insertion length or A-dimension is typically specified from the top of the process mount to the opening in the vessel.
|
Specifications |
|
|
Range: |
8" to 26.2' (20cm to 8m) |
|
Accuracy: |
± 0.2% of span in air |
|
Beam width: |
3" (7.6cm) diameter |
|
Dead band: |
8" (20cm) |
|
Supply voltage: |
12-28 VDC |
|
Signal output: |
4-20 mA, two-wire |
|
Calibration: |
Fixed |
|
Process temp: |
F: -4° to 140° |
|
Pressure: |
30 psi (2 bar) |
|
Trans. insertion: |
7" to 10' (18cm to 3m) |
|
Enclosure rating: |
NEMA 4X (IP65) |
|
Process mount: |
2" NPT (2" G) |
|
Trans. material: |
PVDF |
|
Cable material: |
FEP |
|
Classification: |
General purpose |
Other Level Sensor Products
Matrix of Level Sensor Products
Level Transmitter Application Success Stories
